Amethyst Posted March 28, 2013 Report Share Posted March 28, 2013 TS L125. 200% Trifid L8 engine (60% less radar footprint). Base is 0.8k. Fitted, the sig is 0.5 Add a vendor Pleiades L7 reactor - supposedly Reduce Ship Signature (activated) 25% less radar footprint. Activate - but the result is still 0.5. Am I missing something or is this broken? Quote Link to comment Share on other sites More sharing options...
Terrell [BT] Posted March 28, 2013 Report Share Posted March 28, 2013 What's your ship's overall signature? A Terran Scout's base signature (signature of the ship not counting the installed engine) is 2.5K. If you're using a Mercurius/Halley/Trifid engine and your signature is lower than 2.5K it's working. Make sure you check your other equipment and make sure you don't have anything with the increase ship signature debuff. These three engines, in terms of reduced signature, actually work better for Terrans than they do for Jenquai, due to the Jenquai's lower base signature of 0.5K and the reduction being percentage based. The buff from the Peliades reactor should stack with the buff from the Mercurius/Halley/Trifid. Quote Link to comment Share on other sites More sharing options...
SiSL Posted March 28, 2013 Report Share Posted March 28, 2013 TS Base Signature is 2.5K Trifid Base Signature: 0.8K Total 3.2K, 60% less radar footprint should be 1,28 ~ 1.3K There is something wrong with your calculation or there are other items effecting it. Currently my TS using L9 Trifid with 65% reduction 2.5K + 0.9K (L9) = 3.4K * 35% = 1,19 ~ 1.2K (and 1.2K is correct) There is no way your signature as a TS drop to 0.5 with just Trifid. Quote Link to comment Share on other sites More sharing options...
dgvol Posted March 28, 2013 Report Share Posted March 28, 2013 FYI - you can go to the test ship tab under your character and look at the stats debug and it shows you the calcs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.